Effective Solutions to Fix Paper Jam Issue in Printronix Printer

The Printronix printer is the best printer that has many features. It is not only among the most preferred ones but also offers qualitative services. But as we are aware that technical error is inevitable, and can knock down the device at any point of time. Due to this sometimes the users face Paper jam issues in the Printronix printer. If you also face this problem in your printing machine then you need to fix it as soon as possible. Because due to paper jam you can’t print your important documents. Therefore, you need to fix it as soon as possible. Here in the below section, we provide some effective solutions which help you to solve your problem. Through the help of these steps, you can easily fix your entire problem in a secure way. If you need help to Printronix printer support then don’t worry. Our technician also helps you to solve this issue as soon as possible.

Solutions to Remove Dell Printer paper jam problem

Solution 1. Clearing the paper jams for the SSF

SSF is a single sheet feeder. Sometimes, a piece of paper got stuck in the SSF. So if you find that any piece of paper gets stuck in this feeder, then replace it instantly. Just perform the easy steps given below:

• First, try to replace the paper from SSF instantly. If you are unable to replace it, don’t panic. Then, you have to remove this page from the inside of the printing device.
• Remove the standard 250-sheet tray from the printer. Then, check whether any paper is jammed inside this. If you don’t find any paper, then open the front cover by pushing the side key.
• Then, open the belt unit. When it stops, take the jammed paper out of this.
• Make sure that there is no piece of paper still remaining inside your device.
• Then, enter the belt unit again and push it to the top.
• Now, shut down the front cover and reinsert the tray in its exact place.

Solution 2. Remove the jammed paper from the fusor

• Turn off your dell printing machine.
• Then, after 10 minutes of waiting, open the front cover by the same process.
• Open the belt unit again. 
• You will find levers at the end of the fusor. Lift these levers to replace the stuck paper. If you are not able to replace it, then open the fuser cover and take a piece of paper out. 
• After doing this put the fuser cover back and click down the levers.
• Enter the belt unit and the front cover.

Solution 3. Clearing the paper jam from the Duplexer

• Open the front cover of your printing device.
• Then, open the duplexer cover.
• Check if the paper is stuck in the duplexer or not. If yes, then remove it gently from the duplexer.
• Now close the cover of the duplexer, and then the front cover.

Through the help of these methods, you can easily fix your problem with ease. In case these steps fail to solve your problem then you will be able to contact the experts. For your help, Printronix printer repair number +(1)-833-781-7339 available 24*7 at your service.